| Signature Programmable Immersion Circulator, Model 1127p - Model 13271-142 - Each |
Gift-wrapping is not available for this product.
- electrical: 120V, 60Hz, 11A.
- Manufacturer: VWR - Model 13271-142 - Unit: Each
- VWR Signature Programmable Immersion Circulator, Model 1127P
Due to item weight, additional shipping/freight charges may apply.
VWR Signature Programmable Immersion Circulator, Model 1127P - Model 13271-142 - Each : Expandable Mounting Bridge VWR Two-Year Limited Warranty "Design-your-own-bath" circulator combines a programmable controller with flexible circulator placement. Bridge expands from 38.1-63.5cm (15-25") for placement on a variety of containers. The programmable controller features a backlit full-graphics display with set point and actual temperatures displayed simultaneously. A powerful variable-speed pressure/suction pump and RS-232 interface are standard. Circulator also features remote temperature probe capability as well as a full range of software for programming and data logging. The single knob encoder permits intuitive, simplified controller setup and operation. Adjustable audible and visual alarms alert user to out-of-range conditions. Circulator has over-temperature and low-liquid shutdowns for protection. The cooling coil can reduce minimum operating temperature when connected to a water source. The high-temperature tubing is 0.9m (3') of flexible fluoropolymer resin-lined, stainless steel overbraid tubing with 6.4mm (1/4") NPT quick connects on both ends. For use at elevated temperatures. Maximum temperature: 300 degrees C (572 degrees F). The general-purpose clear bath algicide is compatible with stainless steel and helps keep water baths clean, odor-free, and resistant to black algae. One 237mL (8oz.) bottle treats approximately 757L (200gal.). Supplied in a plastic dispenser bottle. Use the concentrated bath cleaner for cleaning and removing rust and minerals deposits from stainless steel and plastic baths. Bath cleaner comes in 473mL (16oz.) bottle; 29.6mL (1oz.) treats approximately 7.6L (2gal.). The remote temperature probes permit point of control to be switched from inside circulator bath to a remote location, such as an open tank. Probes compensate for the heat losses through tubing between the circulator and control point. Feature platinum RTD sensor with 0.4dia.x15.2Lcm (5/32x6") stainless steel sheath. A 2.5cm (1") rubber coupling
Shipping Weight: 70lb
This item will be shipped from the manufacturer and is not one we carry in stock. Please contact us for availability, as we cannot always guarantee order fulfillment.