Gift-wrapping is not available for this product.

Features:

• Mesh: 8. Weight,kg (lbs.): 2.27 (5). Hammond No.: 13005.
• Manufacturer: Hammond - Model 13005 - Unit: Each (5 LB)
• DRIERITE Absorbent, WA Hammond

Product Information:

DRIERITE Absorbent, WA Hammond - Model 13005 - Each (5 LB) : Anhydrous calcium sulfate. For drying organic liquids, either in the liquid or vapor phase. For drying air and other gases. DRIERITE will absorb 6-8% of its weight in water, depending on relative humidity. Highly porous granular structure absorbs water both by hydration and capillary action. Non-disintegrating, non-wetting, non-poisonous, non-corrosive, non-indicating, and repeatedly regenerative. Neutral, stable, constant in volume, and inert except toward water. Insoluble in organic solvents. Temperature limitation is approximately 107 degrees C, at which point the half-hydrate begins to lose water appreciably. Regeneration procedure for Drierite Desiccant: Desiccant granules must be single layered on a metal baking sheet. Oven must be heated to 450 degrees F or 230 degrees C (no more or less). Desiccant granules must be baked for 11/2 to 2 hours (no more or less). Once this is done, the product has been properly regenerated and is ready for re-use. This procedure is very specific. It should not be varied in any way.

This item will be shipped from the manufacturer and is not one we carry in stock. Please contact us for availability, as we cannot always guarantee order fulfillment.