| Drierite Absorbent, Wa Hammond - Model 14005 - Each (5 Lb) |
Gift-wrapping is not available for this product.
- Mesh: 10-20. Weight,kg (lbs.): 2.27 (5). Hammond No.: 14005.
- Manufacturer: Hammond - Model 14005 - Unit: Each (5 LB)
- MSDS sheet for this product can be found at: http://msds.egeneralmedical.com/22890-284.pdf
- DRIERITE Absorbent, WA Hammond
DRIERITE Absorbent, WA Hammond - Model 14005 - Each (5 LB) : Anhydrous calcium sulfate. For drying organic liquids, either in the liquid or vapor phase. For drying air and other gases. DRIERITE will absorb 6-8% of its weight in water, depending on relative humidity. Highly porous granular structure absorbs water both by hydration and capillary action. Non-disintegrating, non-wetting, non-poisonous, non-corrosive, non-indicating, and repeatedly regenerative. Neutral, stable, constant in volume, and inert except toward water. Insoluble in organic solvents. Temperature limitation is approximately 107 degrees C, at which point the half-hydrate begins to lose water appreciably. Regeneration procedure for Drierite Desiccant: Desiccant granules must be single layered on a metal baking sheet. Oven must be heated to 450 degrees F or 230 degrees C (no more or less). Desiccant granules must be baked for 11/2 to 2 hours (no more or less). Once this is done, the product has been properly regenerated and is ready for re-use. This procedure is very specific. It should not be varied in any way.
Shipping Weight: 6lb
This item will be shipped from the manufacturer and is not one we carry in stock. Please contact us for availability, as we cannot always guarantee order fulfillment.