| Ropure Infinity Premier Reverse Osmosis Systems, Thermo Scientific - Model D9014 - Each |
Gift-wrapping is not available for this product.
- electrical: 120V, 50/60Hz. thermo scientific no.: D9014 -|-. flow rate, l/hr.: 30.
- Manufacturer: Thermo Scientific - Model D9014 - Unit: Each
- ROpure Infinity Premier Reverse Osmosis Systems, Thermo Scientific
Due to item weight, additional shipping/freight charges may apply.
ROpure Infinity Premier Reverse Osmosis Systems, Thermo Scientific - Model D9014 - Each : Ideal systems for providing 40-400L of Type III water per day for a NANOpure Infinity system or for other less demanding lab applications. System eliminates 90-95% of the impurities from its feed water, producing water with up to a 10-fold increase in purity. Utilizes a thin film composite membrane and pretreatment to ensure superior water quality and extend membrane life. Systems available in both 15L/hr. and 30L/hr. formats. Wall or bench mountable. Features include microprocessor control for 24-hour fully-automatic operation, an integral pump for consistent flow rates and an automatic or manual flush that cleanses RO membranes for 10 minutes every 4 hours. A series of internal pressure gauges allows monitoring of membrane operating pressure and prefilter performance. The Premier System features a special Membrane Protection System (MPS) that inhibits scale build-up on the membrane surface, enhancing its life and performance. A large, pivoting LCD automatically alerts when the pretreatment and MPS cartridges need changing. It also constantly monitors water quality including % rejection, water conductivity, resistivity and TDS levels. Optional 60L storage reservoir, made of rigid fluorinated polyethylene, is filtered to prevent airborne contamination and incorporates level controls to start/stop the ROpure system, allowing 24-hour automatic operation. Draw-off points include spigot, dishwasher port, and feed to NANOpure Infinity systems. Can be bench or wall mounted. CSA approved. Inlet Pressure: 30-100 psig Inlet Water Temperature: 4-50 degrees F Plumbing Connections, Feedwater: 3/8" Product Water: 1/4" Reject Water: 3/8" % Recovery: 10-25% Overall Dimensions: 50.8W x 61H x 40.6D cm (20 x 24 x 16") Weight: 38.6 kg (85 lbs.) Ordering Information: All units supplied with necessary membranes, pretreatment cartridge, prefilter cartridge, and MPS cartridge.
Shipping Weight: 70lb
This item will be shipped from the manufacturer and is not one we carry in stock. Please contact us for availability, as we cannot always guarantee order fulfillment.