| Ultipor N66 Filters, Pall Trincor - Each |
Gift-wrapping is not available for this product.
- PoreSize, um: 0.1. FiltrationArea, cm2: 116.1. HousingMaterial: Polypropylene.
- Pall Trincor No.: DFA3001-NAEY.
- Unit: Each
- Ultipor N66 Filters, Pall Trincor
Ultipor N66 Filters, Pall Trincor - Each : Used to control particulate and bacterial contamination in low-flow, small volume batch processing where a compact, self-contained assembly is desired. Applications in the pharmaceutical, electronic, chemical, biological, bioprocessing, food, beverage, and cosmetic industries. Disposable, self-contained unit with nylon 6,6 filter permanently assembled in a plastic housing that can be inserted directly into flow line in seconds. No binders, glues, surfactants, or resins are used. Integral vent allows full medium wetting liquid filtration. The 10mm (3/8") hose barb type connections accept any flexible 9.5mm (3/8") I.D. tubing. Autoclavable prior to use and may then be repeatedly autoclaved up to 16 hours cumulative at 121 degrees C (250 degrees F) or up to 4 hours at 140 degrees C (284 degrees F). Maximum service temperature is 150 degrees F at 50psi (must be strictly observed). Liquids filterable up to 75psi at ambient temperature; gases, up to 50psi. Dimensions: 7.2O.D.x12.4Lcm (227/32 x 47/8"). All components FDA-listed for food contact per CFR Title 21. Assemblies are 100% integrity tested by the Forward Flow Test (per Pharmaceutical Filter Guide, Bulletin AB200). Components have been extensively tested for biological safety using tests per U.S.P. for Class VI plastics at 121 degrees C (250 degrees F).
Shipping Weight: 4lb
This item will be shipped from the manufacturer and is not one we carry in stock. Please contact us for availability, as we cannot always guarantee order fulfillment.