| Heated Circulating Water Bath And Incubator For Coliform Testing, Model 8306, Polyscience |
Gift-wrapping is not available for this product.
- electrical: 240V, 50/60Hz, 7A. polyscience no.: 062971.
- Manufacturer: Polyscience - Model 62971 - Unit: Each
- Heated Circulating Water Bath and Incubator for Coliform Testing, Model 8306, PolyScience
Due to item weight, additional shipping/freight charges may apply.
Heated Circulating Water Bath and Incubator for Coliform Testing, Model 8306, PolyScience : Circulating bath is specifically designed for coliform testing, including determination at 44.5 degrees C as specified by APHA, AWWA, WEF, and EPA, using either the membrane filter or MPM method. The bath may be used for E. coli determination at 45.5 degrees C as specified by the AOAC. Bath meets the requirement for the APHA, AWWA, and WEF seven-hour fecal coliform tests at 45.5 degrees C and for the DST (Defined Substrate Technology) tests for E. coli and total coliforms at 35 degrees C. Three programmable preset temperature buttons allow quick transition between common coliform test temperatures. Bath temperature is displayed on a LED display and may be viewed in degrees C or degrees F, in increments of 0.1 degrees . The bath features an adjustable overtemperature cutoff and a low-liquid cutoff. Bath is equipped with a tilting, transparent polycarbonate cover that drains fluid back into the bath when opened. The integral two-speed simplex pump is switchable between 9L/min. and 15L/min. (2.4gal./min. and 4gal./min.). Pump can be used to circulate bath fluid to other instruments, such as refractometers or spectrophotometers, using a closed-loop configuration. All wetted components are constructed of corrosion-resistant stainless steel. The outer case is protected with a durable, easy-to-clean epoxy powder coating. CE marked. CSA certified. Temperature Range: 5 degrees C above ambient to 150 degrees C Temperature Stability: +-0.05 degrees C Reservoir Capacity: 28 L (7.4 gal.) Dimensions, Interior: 27.3L x 29.8W x 20.3D cm (103/4 x 113/4 x 8") Overall: 35.6L x 55.9W x 34.3D cm (14 x 22 x 131/2") Shipping Weight: 22.2 kg (49 lbs.) Ordering Information: Supplied with a sample tray and thermometer clip. Thermometer not included.
Shipping Weight: 60lb
This item will be shipped from the manufacturer and is not one we carry in stock. Please contact us for availability, as we cannot always guarantee order fulfillment.