| Xpert Filtered Balance Systems, Labconco - Model 3950301 - Each |
Gift-wrapping is not available for this product.
- ShippingWeight,kg (lbs.): 75 (165). NominalWidth,m (ft.): 0.9 (3). Electrical: 115V, 60Hz.
- Manufacturer: Labconco - Model 3950301 - Unit: Each
- XPert Filtered Balance Systems, Labconco
Due to item weight, additional shipping/freight charges may apply.
XPert Filtered Balance Systems, Labconco - Model 3950301 - Each : AirflowMonitor: Guardian. Interior Dimensions,W x D x H, cm (in.): 85.4 x 59.4 x 57.8 (335/8 x 233/8 x 223/4). Exterior Dimensions,W x D x H, cm (in.): 91.4 x 73.7 x 94.2 (36 x 29 x 371/8). Exterior Dimensions,W x D x H, cm (in.): 91.4 x 73.7 x 94.2 (36 x 29 x 371/8). Labconco No.: 3950301. These portable systems provide user protection by keeping powders and particulates contained during weighing procedures. The built-in blower and HEPA filter are mounted in the upper plenum to save space, and the enclosures have low installation costs and require no outside ducting. Systems also provide quiet operation as low as 45dBA, depending on face velocity. The deep interior easily accommodates large micro and analytical balances. The Clean-Sweep airfoil allows air to sweep the work surface for maximum containment. The perforated rear baffle promotes horizontal laminar airflow to maximize containment. The upper containment sash foil bleeds air into the enclosure to direct concentrations of contaminants away from the operator's breathing zone. The upper dilution air supply introduces room air at the top of the sash to dilute contaminants in the upper chamber and bathe the back of the sash with clean air. Additional side-entry airfoils allow air to sweep across the interior glass surfaces to enhance containment. The airfoil's ergonomic design provides a comfortable position for the operator's forearms. Systems feature a true bag-in/bag-out filter disposal system for safely removing and replacing the HEPA filter. The HEPA filter cell is 99.99% efficient on particulates 0.3um in size. An upper diffuser screen, located above the work area, provides protection for the HEPA filter. The system also features a front-mounted Minihelic pressure gauge that monitors pressure differential across the HEPA filter to help determine filter loading. The built-in, positive pressure impeller is surrounded by a negative pressure plenum so that if a leak should develop, the unfil
Shipping Weight: 70lb
This item will be shipped from the manufacturer and is not one we carry in stock. Please contact us for availability, as we cannot always guarantee order fulfillment.