| Precise Controlled Atmosphere Glove Box, Labconco - Model 5220100 - Each |
Gift-wrapping is not available for this product.
- electrical: 115V, 60Hz, 8A. labconco no.: 5220100.
- Manufacturer: Labconco - Model 5220100 - Unit: Each
- Precise Controlled Atmosphere Glove Box, Labconco
Due to item weight, additional shipping/freight charges may apply.
Precise Controlled Atmosphere Glove Box, Labconco - Model 5220100 - Each : Designed to provide a leak-tight environment for work with contamination-sensitive materials. The unit features a dry powder, epoxy-coated steel superstructure, 0.6cm (1/4") thick laminated safety glass viewing window with powder-coated steel frame and neoprene gasket, and molded one-piece, medium-density, polyethylene shell. The cutout area is 67Wx31.8Hcm (2613/32x121/2") high, and the window can be easily removed for loading equipment. The space saving inner and outer transfer chamber doors pivot upward and are counterbalanced and equipped with quick latches. The interlocking shelf and high vacuum sleeve of the interior transfer chamber is made of dry powder, epoxy-coated steel. The black, chemical-resistant phenolic core work surface is sealed to the glove box floor. Glove box includes a pressure relief valve that activates at pressure/vacuum above 15.2cm (6") or below -15.2cm (-6") of water gauge. The pressure relief valve vent has a 10.2cm (4") nominal diameter. Unit has an interior ceiling-mounted electrical duplex receptacle with 5A maximum (100/115V model) or 2A maximum (230V model) circuit load, and includes switches for the light and innermost interior electrical receptacle. Glove box is factory leak tested with a mass spectrometer while pressurized with helium at 12.7cm (5") of water gauge. No detectable leaks greater than 1x10-4 mL/sec. Unit is performance tested to maintain less than 5ppm oxygen levels and less than 50ppm moisture levels. Features six manual valves with 0.95cm (3/8") compression fittings and hose barbs. Two valves on the main chamber and two on the transfer chamber are for purging and filling. The other two on the main chamber are for drying connections. The main chamber has a pressure gauge with readings from -12.7 to 12.7cm (-5 to 5") of water gauge. The transfer chamber has a pressure gauge with readings from -73.7 to 0cm (-29 to 0") of mercury. Glove box meets Class 1 atmosphere containment conditions for oxygen leak rates per
Shipping Weight: 70lb
This item will be shipped from the manufacturer and is not one we carry in stock. Please contact us for availability, as we cannot always guarantee order fulfillment.