| Xpert Bulk Powder Enclosures, Labconco - Model 3963502 - Each |
Gift-wrapping is not available for this product.
- exterior dimensions: 155.7 x 94 x 191.8 (615/16 x 37 x 751/2) -|- ,w x d x h, cm (in.). electrical: 115V, 60Hz. labconco no.: 3963502.
- Manufacturer: Labconco - Model 3963502 - Unit: Each
- XPert Bulk Powder Enclosures, Labconco
Due to item weight, additional shipping/freight charges may apply.
XPert Bulk Powder Enclosures, Labconco - Model 3963502 - Each : interior dimensions: 146.4 x 76.2 x 81.3 (575/16 x 30 x 32) -|- ,w x d x h, cm (in.). shippingweight,kg (lbs.): 136 (300). nominalwidth,m (ft.): 1.5 (5). liftlocation: Right. Bulk powder enclosures keep airborne particulates and fumes contained during powder transfer operations. Airfoils with Clean-Sweep openings enhance airflow, and a zone-perforated rear baffle creates a horizontal laminar airflow to maximize containment. A 30.5cm (12") sash operating height and the ample interior height can accommodate large micro or analytical balances. Angled sash is constructed of 0.6cm (1/4") thick tempered safety glass that is hinged to pivot up and lock for loading. Enclosures feature two utility ports, upper dilution air supplies, and upper containment sash foils. Enclosures incorporate a low-profile design and are equipped with side-entry airfoils, built-in top-mounted airflow monitor, and left side-mounted waste chute. Sides and top are constructed of 0.6cm (1/4") thick, non-static producing tempered safety glass that provides excellent visibility, ambient light, and protection. Sturdy, dry-powder and epoxy-coated aluminum frame and steel rear panel and baffle support the enclosure. A push-button hydraulic lift mechanism raises the container to the optimal height. An electronic beam senses the location of the container and triggers the lift mechanism to automatically stop at the optimal access height. Three 5.1x25.4cm (2x10") rectangular openings may be used to attach the enclosure to a remote blower or portable exhauster. Enclosures also feature a built-in Guardian 1000 digital airflow monitor. If the face velocity falls below the setpoint for more than six seconds, an audible alarm sounds and a red light glows. The alarm can be muted. Airflow monitor features an LCD display of actual face velocity and an RS-232 port. Retaining rings are constructed of Type 304 stainless steel. One retaining ring is required; it should be slightly larger than diameter of source
Shipping Weight: 301lb
This item will be shipped from the manufacturer and is not one we carry in stock. Please contact us for availability, as we cannot always guarantee order fulfillment.